Catalytic Conveer Alarm
User Guide
Your Shark Alarm is shipped with 3 x AAA batteries already fitted.
However you will need to activate the batteries by pulling and
removing the transparent tag that protrudes from the battery
compartment
(1)
.
The alarm will indicate that the batteries are now active with a single
‘bleep’ sound.
The remote fob already has a battery fitted and is ready to operate.
1 - Remove
Baery Tab
Getting Started
CatShark is now ready to use but before attaching to your vehicle it is best to become familiar with
operation.
To arm CatShark simply press the key on the remote. The alarm will issue a 3 tone ‘Do-Rei-Mi’ sound.
After 5 seconds, a single bleep will confirm that the system is now armed.
Once armed, the CatShark has 2 levels of response when it detects tampering:
1
Stage one is a 2 second warning alarm - this will not be repeated unless further tampering is detected
within 10 seconds.
2
Stage two is the main 30 second alarm that is triggered if further tampering is detected. This main alarm
is made up of 6 different alarm signatures in an escalating sequence to produce maximum attention.
To cancel an active alarm sequence, press the key - this will cancel the alarm and confirm with the
‘Mi-Rei-Do’ sound.