1 DATECS
LINEAPRO 11 INDUSTRIAL
USER MANUAL
UM 07.01.34/v1.1.0 9
GETTING STARTED
LineaPro 11 Industrial has rechargeable Li-ion battery. Can be charge from USB port or External
features connector. Power source can be variable from USB wall adapters, Datecs power stations.
Before first use, battery must be fully charged.
If the device is fully discharged, charging time to fully charged would be approx.
4 hours and 30min (for more details please refer to the table below).
LineaPro 11 Industrial battery always start to charge when external power was provided. Charging
stops when battery is fully charged. Charging power can be
“
LOW
”
and
“
HIGH
”
and depends on Apple
device connection state.
(valid for firmware version 01.05.68.64)
External Power supply*
Apple device connected
Apple device disconnected
500mA
LOW
LOW
1000mA
LOW
HIGH
>1000mA
HIGH
HIGH
*Maximum current which can provide the power supply
LOW
–
350mA
HIGH
–
580mA
Charging form USB adapter: