. . . . . . . . . . . . . . . . . . . . . .
Page 15
DPP-350 User Manual
Dip Switch Settings
The DPP-350 is designed to use different
methods of
communications. Care must be taken to ensure that the DIP
Switches are not changed from its default factory configuration
unless required.
DIP SWITCH SETTINGS:
The printer has two absolutely different operation modes.
They are determined by the state of switch Sw2:
OFF ESC/POS mode
ON
Hex Dump mode
Switch
OFF
ON
Sw1
Wide paper roll
(78 mm)
Thinner paper roll
(58 mm)
Sw2
ESC/POS mode
Hex Dump mode
Sw3
Hardware protocol
Xon/Xoff protocol
Sw4
Normal operation mode
Protocol mode
Table 6