DT4227 UI (PS)
20200205-V0
11
5.2. Connecting the mains
The following figure shows the wiring plan, connecting the a
DT4227 UI
PS
type instrument to the mains:
Wiring plan, connecting
the PS type instrument
to the mains
In case of DC supply the
polarity is indifferent.
1. Loosen terminal screws.
2. Insert the wire ends into the open terminals according to the wiring
plan.
3. Screw the terminal in.
4. Check the hold of the wires in terminals by pulling on
them firmly.
