Datcon DT1315 Series, Operating Instructions Manual

Page: 17 / 28

DT1315 xx xx
20100826-V0
17
8. Appendix
8.1. Technical specification
Intrinsic safety data:
Certification: 05 ATEX 020 X
Marking: II (1) GD [EEx ia] IIC / IIB (-20 °C ≤ Ta ≤ +50 °C)
Um: 250 Veff
Safety data:
IIC IIB
Uo Io Po
Co Lo Co Lo
Limit outputs safety data:
19.1 V 91 mA 570 mW 150 nF 4 mH 450 nF 12 mH
Input parameters:
Input signal: DC current or DC voltage
Ranges: 0-20 mA (DT1315
I0
xx) or
4-20 mA (DT1315
I4
xx) or
0-10 V (DT1315
U10
xx)
Input resistance (current input): ~68 ohm
Input resistance (voltage input): ~1 Mohm
Overdriving ability: 5%
Output parameters:
Output signal: DC current or DC voltage
Ranges: 0-20 mA (DT1315.xx
I0
) or
4-20 mA (DT1315 xx
I4
) or
0-10 V (DT1315 xx
U10
)
Terminating resistor (current output): 800 ohm (max.)
Loading resistor (voltage output): 500 ohm
Error of the output signal: 0.05 % (max.), 22 °C amb. temperature
Nonlinearity: 0.01 % (max.)
Temperature-dependency: 50 ppm / °C (max.)
Supply-voltage dependency: practically zero
Response time: 10 ms (10-90 %)