RS-232 WIRELESS BRIDGE USER’S MANAUL REV. 02
3
Overview
The RS-232 wireless bridge is designed to be a transparent bidirectional three-wire RS-232 cable
replacement. The RS-232 Wireless Bridge has a DB9 DCE female connector for data and for the internal
radio module configuration, and a micro USB port to configure settings that are specific to the RS-232
Wireless Bridge. The RS-232 Wireless Bridge is available in three different options differing by frequency
and RF power output.
It is possible to mix and match Wireless Bridge products. The RS-232 Wireless Bridge will communicate
with the RS-485, Analog and Digital I/O and USB Wireless Bridge products that share the same radio
configuration. By using an RS-485 Wireless Bridge at point A and a RS-232 Wireless Bridge at point B, the
wireless bridges can act as a RS-485 to RS-232 over-the-air converter.
Specifications
Performance
24LP
24HP
09SX
OVER-THE-AIR
DATA RATE
250 Kbps
250 Kbps
Low: 10Kbps
Mid: 110Kbps
High: 250Kbps
INDOOR/URBAN
RANGE
Up to 200ft.
Up to 300ft.
Up to 1000ft.
OUTDOOR/ RF LINE-
OF-SITE RANGE
Up to 4000ft.
Up to 2 miles
Up to 10 miles
TRANSMIT POWER
6.3 mW
63 mW
1 Watt
RECEIVE SENSITIVITY
-101 dBm
-101 dBm
Low: -113 dBm
Mid: -106 dBm
High: -103 dBm
Table 1. General Performance Specifications
