Datavideo WM-1 Series, Instruction Manual

Page: 10 / 20

10
5. Insert the base plate between the left and right brackets then
secure it in position by fastening six
M5x20 nickel plated hex
socket cap screws to the respective holes on the brackets as
shown in the diagram below. The inner rails on the right and left
brackets should allow you to move the base plate back and forth.
Please note that you can use the bubble level meter to check if the
base plate is properly aligned. If the bubble is at the center, the base
plate is horizontally aligned (perfectly levelled). If the bubble is on
either side, the base plate is tilted to the sides.