11
4.
Firmware update procedure
From time to time Datavideo may release new firmware to either add new features or to fix
reported bugs in the current TLM-170L firmware. Customers can update the firmware themselves
if they wish or they can contact their local dealer or reseller for assistance should they prefer this
method.
This page describes the firmware update process and it should take
approximately 15 minutes
total time to complete
.
As well as a working TLM-170L you will need:
The latest firmware update for the TLM-170L
monitor
.
This firmware file can be obtained from your local Datavideo office or dealer.
USB 2.0 pen drive 128MB or larger with a USB A connector.
Once started
the update process should not be interrupted in any way
as this could result in a
non-responsive unit.
How to update the firmware
1.
Unzip / extract the supplied zipped archive or rar folder.
2.
Wipe the contents of the USB 2.0 pen drive so it is empty.
3.
Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure the file name
is renamed to MSTFLASH.bin.
4.
Plug the USB 2.0 pen drive into the USB 2.0 port labelled
MAINTENANCE
on the back of the
monitor.
5.
Reboot
TLM-170L
and the update will be automatically in progress.
6.
The
TLM-170L Monitor
will reboot itself at the end of the process.
