Remote Control Setup
1. Use network cable line to connect TLM-170G and Router (has DHCP function).
2. Press TLM-170G MENU button, and then using the Up / Down buttons select SETUP NETWORK
3. Set
TLM-170G:
DHCP set ‘’ON’’
4. Set
PC:
IP: 192.168.1.1
Mask: 255.255.255.0
Gateway: 192.168.1.1
5. Open IE Browser, and then key in the IP address http://192.168.1.2
Another setting way:
1. Use network line(crossover) to connect TLM-170G and PC RJ-45 port.
2. Press TLM-170G MENU button, and then using the UP / DOWN buttons select SETUP NETWORK
3. Set
TLM-170G:
DHCP set ‘’OFF’’
IP:192.168.1.2
Mask:255.255.255.0
Gateway: 192.168.1.1
4. Set
PC:
IP: 192.168.1.1
Mask: 255.255.255.0
Gateway: 192.168.1.1
5. Open IE Browser, and then key in the IP address http://192.168.1.2, wait a moment the IE will display as below:
In this UI you can set “AV Setting”, “PIP”, “Mark Line” and “Net Work” on your PC.
10