Datavideo TLM-170FM, Instruction Manual

Page: 10 / 52

10
Customization of Button Functions
The user is allowed to customize or re-assign function setting
menus to the F1-F4 shortcut keys. The customization steps are
outlined as follows:
1. First press and hold one of the shortcut keys (F1-F4) for
approximately 3-5 seconds until a pop-up function list appears on
the monitor.
2. Press the left and right arrow keys of the audio volume
adjustment buttons to move between options in the pop-up
function list.
3. Press the menu button to assign the highlighted function
setting menu to the shortcut key selected at step 1.
4. Press the EXIT button to close the pop-up function list.
The pop-up function list is shown below:

Center Marker

Aspect Marker

Safety Marker

Overscan

Scan

Aspect

Color Space

Gamma

Camera Log

Check Field

H/V Delay

Freeze

Color Bar

False Color

Exposure

Histogram

Waveform

Vector

Time Code

Mute

Level Meter

Audio Vector
Button Reset
To reset F1-F4 buttons to factory defaults, follow the steps
outlined as follows:
1. Open the OSD menu, and navigate to SYSTEM .
2. Press the MENU button to enter the SYSTEM sub menu.
3. Move down to the RESET option which is selected by pressing
the MENU button.
4. Press either the VOL+ or VOL- button to enable the reset.
Note: The reset function resets all TLM-170F settings.