27
Option
Parameters
Parameter Value or Range
Default Value
Audio
Mute
OFF/ON
Off
HDMI Input
Input 1-4 / Follow
Follow
HDMI Group
Channel 1/2
Channel 3/4
Channel 5/6
Channel 7/8
Channel 1/2
Level
Auto / SMPTE / EBU
Auto
Tally Mode
Normal / Audio Mixer
Normal
3.5.1 Mute
The
Mute
allows you to turn ON/OFF the embedded audio component at the
HDMI-in
. The default is
OFF.
3.5.2 HDMI Input
In this option, you can select the audio source. Selection of inputs 1-4 allows the SE-500MU to play
the enabled audio source. If “
Follow
” is selected, the audio will enter Audio follow Video mode, i.e.
playback of the audio of the output video.
3.5.3 HDMI Group
The HDMI Group allows the user to assign the HDMI audio channel. The default audio channel is
Channel 1/2. Any audio channel pair of the four audio channel pairs can be selected.
3.5.4 Level
There are two different audio standards available for selection. The user can either select the EBU or
SMPTE standard. By selecting AUTO allows the device to automatically detect the audio standard.
When the image is 50 Hz, the audio follows EBU standard and when the image is 59.94/60 Hz, the
audio follows SMPTE standard.
3.5.5 Tally Mode
Tally output port generally sends two tally signals to each channel. In Datavideo products,
Red
indicates On-Air, and
Green
indicates next camera source.
The SE-500MU provides
two tally modes
:
Normal
: If in normal mode, tally lights of all camera sources displayed on the PGM monitor will be
turned ON (Red). These sources include PGM, PIP and Key sources. While transition is in progress, the
next video will be seen on the PGM monitor, tally light of the PVW source camera will thus also be
turned ON (
Red
).
Audio Mixer
: If Audio Mixer mode is selected, tally light of the PGM source camera selected on the
PCC APP panel will be turned ON (Red). While transition is in progress, the tally light color will remain
unchanged. The tally light color will only change (red/green) after the transition of PGM and PVW
views is complete.