22
Trouble shooting
1.
“Connect failed” error message.
Please check your PC Computer IP address
settings again, and be sure it has been set up
properly.
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
RMC-120 IP address settings assigned Condition
Setting the Local IP: 192.168.0.7
Setting the Subnet Mask : 255.255.255.0
Setting the Remote IP: 192.168.0.1
SE-800 PC Control Software IP address settings
assigned Condition
Client Mode setting Remote IP 192.168.0.7
Summary of Contents for RMC-120
Page 1: ...2005 1 4 Ethernet Control Box for SE 800 RMC 120 USER MANUAL Http www datavideo tek com...
Page 17: ...16 Step 3 Click on Properties Step 4 Select Internet Protocol TCP IP click on Properties...
Page 18: ...17 Step 5 Set up IP address and Subnet mask IP address 192 168 0 1 Subnet mask 255 255 255 0...
Page 22: ...21 Step 3 Select Client Mode and set up Remote IP 192 168 0 7 then Click on the OK button...