50
9. Firmware Update
1)
Copy two image files, p200mcpu.bin and p200mctl.bin, into the root directory of a USB hard
drive (<16 GB) and insert it into the USB port of the PTC-200 (You may also use USB
extension cord).
2)
Open the operation menu using the IR remote controller (select from CAM 1-4; default is
CAM1)
3)
Main Menu
=> 5: SYSYEM
=> 5: UPDATE SOFTWARE
=> 4: UPDATE ALL
=>YES
=> ENTER
4)
Wait for another five minutes until the following lines appear on the screen
-
Updated Mot-BD=>OK.
-
Updated MCPU =>OK.
The OSD will flash “Write OK/Power ON Again” alternately; it ta
kes approximately 5-7
minutes to complete the update.
5)
Turn off the device by unplugging the power cord and plug the power cord back into the
socket to turn on the device again.
6)
FW Update is complete as soon as the device is booted up.
