background image

PD-2A

QUICK START GUIDE

5

Front Panel

On / Off Switch

Powers the PD-2A On / Off when using AC Power.

N.B. From DC Power the On / Off Switch is redundant

AC In with built-in fuse

AC inlet connects suitable mains power outlet – 100-240VAC. The socket contains a 

fuse holder fitted with a 6.3A fuse.

Cooling Fan

The PD-2A has three built-in cooling fans; please ensure that fans are not blocked, and 

airflow is available. 

N.B. The left two fans will start operation when internal ambient temperature 

reaches 50

°

C .

The left fan will start operation when internal ambient temperature reaches 70

°

C .

DC OUTPUT LED

1~7 XLR DC outputs LED indicator

Indicator lights up during normal operation

Indicator lights off if output overload or fault

DC Input(Euro Type Terminal)

The PD-2A can be powered from a suitable 12V power source. When working from 

DC the PD-2A will not regulate the power outlets. 

Please ensure that the 12V power source that you use is regulated. If you intend to 

run the PD-2A from a car or van power outlet, please make sure a suitable regulator 

is used on the power feed.

Green light : DC input LED indicator

Red twinkle light : when internal ambient temperature exceeds approximately 70°C 

degrees

Power Source Input Select AUTO / AC

The Input select switch can be set to AC or AUTO according to the power input that 

you intend to use.

(V1 and V2 supply at the same time)

AUTO: When V1 drops below 9.5V,V2 will supply current to DC output until V1 rises 

above 11.3V. 

AC: The DC output is only by the V1.

V1:AC to DC 12V (Internal switching power supply)

V2:DC input (External)

100-240VAC 6A

50/ 60 HZ

AC INPUT

FUSE RATING

F6.3A/ 250V

1

2

3

4

5

6

7

DC OUTPUT

AC

AUTO

POWER 

SOURCE 

INPUT 

SELECT

12V

400W

MAX

DC INPUT

CAUTION

FOR CONTINUED 

PROTECTION 

AGAINST RISK OF 

FIRE REPLACE ONLY 

WITH SAME TYPE AND 

RATING OF FUSE.

E360526

POWER CENTER

PD-2A

1

2

3

4

5

6

7

DC OUTPUT

12V

400W

MAX

DC INPUT

AC

AUTO

POWER 

SOURCE 

INPUT 

SELECT

Power

Switch

DC Outputs 

LED Indicator 1~7

DC Input

12V 400W (Max)

Power Source

Input Select

Three Cooling Fans

AC Input.

100~240VAC

Summary of Contents for PD-6









Reviews: