5
AC Outlet 110V / 240V 5A
2 x AC Outlet at same voltage as AC Input (110~120 / 220~240V
according to model)
N.B. Sockets are redundant when PD1 is powered from DC
DC In
The PD1 can be powered from a suitable 12V power source. When
working from DC the PD1 will not regulate the power outlets.
Please ensure that the 12V power source that you use is regulated.
If you intend to run the PD1 from a car or van power outlet make
sure that a suitable regulator is used on the power feed.
Pin 4 should be wired positive and Pin 1 should be ground.
N.B. The AC Outlets are not active when the PD1 is powered
via the DC In.
N.B. The On / Off switch is redundant when the PD1 is powered
from a DC supply.
Input Select AC / DC
The Input select switch can be set to AC or DC according to the
power input that you intend to use.
N.B. Do not connect AC and DC power inlets at the same time.
