Datavideo NVS-40D, Instruction Manual

Page: 21 / 100

21
3. After the SSD/HDD is
placed back into the
enclosure and the four
screws are screwed, the
SSD/HDD enclosure will
be shown as the
diagram.
4. Finally, please insert
the SSD/HDD enclosure
into the HDD tray on
the left side of the NVS-
40 and then slide the
LOCK/UNLOCK switch to
the LOCK side as shown
as the diagram. After
the SSD/HDD enclosure
is inserted and locked,
the LED indicator will be
lit.
Chapter 5 NVS-40 Web Control User Interface
After connecting the NVS-40 to the public network by following the steps of the
quick start guide in the previous chapter, users can control the NVS-40 by the Web
Control User Interface now. Please refer to following chapters for details of the
setting and control of the NVS-40 Web Control User Interface.
5.1 Main Control Interface
After the IP address of the NVS-40 is detected by the IP Finder utility software, users
can enter the detected IP address into the address bar of the web browser, and then
the NVS-40 Web Control User Interface will be shown as follows. In this example, the
detected IP address is “192.168.1.244”.
The main options of the NVS-40 Web UI include Source, Encoder, Record, Streaming,
CG, PGM, Monitor, System, Status and Advance. All of those options will be shown
on the toolbar menu.