Datavideo NVD-30, Instruction Manual

Page: 14 / 30

Network Video Decoder
NVD-30
14
Settings > Display Setup
By default the NVD-30 will output video over the digital HDMI port at a
resolution of 720P 50 fps and YUV colourspace.
Please note : The set resolution is only applied when the stream is decoding,
the device will output your monitors preferred resolution as it boots.
Output To
Here you can select to output video digitally over HDMI or over the SD
analogue composite connection.
HDMI (Digital)
When digital is selected you can select a screen resolution from SD
PAL/NTSC right up to HD 1080P60/50. The NVD-30 will scale your source
video to match the output resolution however the aspect ratio (4:3 or 16:9)
should be matched to avoid black space on the output, for optimal
performance match the output resolution to the source video. The colour
space can be switched between YUV (YCbCr) and RGB, most video
equipment will use the YUV colour space however if the colors appear wrong
on your display please try RGB.
Composite (Analogue)
When analogue is selected the UI will change and you can only select
between PAL and NTSC resolution with a 4:3 or 16:9 aspect ratio.