Datavideo iCast 10NDI, Instruction Manual

Page: 61 / 96

61
5.8 PGM
The PGM page allows you to set the Program OUT screen layout. The available layout options are
Quad View, Full Screen, POP, Side By Side and PIP.
Quad View
In Quad View mode, the Program OUT screen will be switched to either a 2x2 or 4x1 Multiview
layout. The corresponding program out buttons of the
displayed input channels will illuminate red (1/2/3/4 or
5). Since the fourth quadrant is shared by channels 4 and
5, only the selected channel button will illuminate red and
the unselected will illuminate white.
The input channel displayed in the fourth quadrant can be changed by clicking the respective layout
icons as depicted in the diagram below. Alternatively, you can also press the respective MV button
located on the front panel to switch between channels 4 and 5.