Datavideo HS-1600T, Instruction Manual

Page: 44 / 96

44
For example, some routers have a gateway IP of 192.168.1.254 and as a result, the default gateway
and primary DNS fields on the NVS-31 must also be configured to 192.168.1.254.

Primary DNS: Same as the default gateway IP, which, if causing issues, can be changed to 8.8.8.8
or 8.8.8.4 (Public DNS provided by Google).

Click the “ Submit ” button to save the network settings.

Reconnect the PC and the NVS-31 to the network.

Restore the PC’s original network settings.

Shut down the HS-1600T; wait for approximately five seconds before turning the HS-1600T back
ON.

You should be able to access the NVS-31 through the fixed IP address.
Advanced Troubleshooting
If you still are unable to connect, please try the following:

Use the ARP table to search for the encoder’s MAC address; the device’s MAC address is on the
print label at the bottom of your HS switcher.

MAC address starts with 00:07:36:03:xx:xx .
-
Switcher’s MAC address starts with 00:07:36:07:xx:xx (HS-1600T and HS-1600T only)

On the command prompt (terminal on MAC OS), enter " arp -a " then press enter key to display an
ARP list. See if the NVS-31 is successfully connected to the network.

Execute services.msc
，
and on the right column of the “ Services” window, locate “ DHCP Client”
then click “ Restart” .

On the command prompt, enter ipconfig/flushdns followed by ipconfig/release and
ipconfig/renew.
6.2 Web User Interface
By now, we have obtained the IP addresses of the PC and the NVS-31. Enter the NVS-31’s IP address
into the address bar of a browser then hit the
ENTER button. Login by entering the user name as well
as the password into a pop-up dialogue box as shown below.
Username: admin
Password: 000000
Click OK to login. Once logged in, the first
page that appears will be the Status page.