12
3. Firmware Update
Firmware Update Procedure for DAC-8P 4K
3.1 Introduction
The firmware is updated by connecting a USB Type C male to USB Type-A
male adapter cable from the USB Type C interface of your DAC-8P 4K to the
USB Type-A interface of your laptop or PC. After that, please use the Firmware
Update Tool for updating the firmware.
This firmware update procedure applies to the following product.
Product Model
DAC-8P 4K
Product Name
4K SDI to HDMI Converter
There is one firmware
Firmware x 1: CV-315KZ-DV-R3_211028A.bin
This document describes how to perform a firmware update on a Windows
computer
Screen images from the Windows 10 operating system are used in this
document as an example. Images used in this document may differ from the
actual screens. For details on Windows and computer operations, please refer
to the instruction manual of your computer.
3.2 Preparation
3.2.1 System Requirements
A computer that meets the following requirements is necessary to perform
the firmware update procedure.
Summary of Contents for DAC-8P 4K
Page 1: ...DAC 8P 4K...
Page 19: ...19...
Page 20: ...20 4 Dimensions All measurements in millimeters mm...
Page 23: ...23 Note...
