3. Versions 4.8/5.2 Instructions
Mode 1 (Power Up Mode)
Windows 2000.
Mode 2
MACs
(running OS X) or
Windows XP
computers.
Mode 3
General setting for other DV devices (Cameras, etc.)
Mac Users: Disconnect your FireWire connection before changing modes or your Mac
computer will lock up.
To change modes please do the following:
To go to
mode 2
, press and hold the encode button for 3 seconds and release. The 12
bit and 16 bit encode LED's will alternate as a confirmation.
To go to
mode 3
press and hold the encode button again for 3 seconds and release.
The CV and S/YUV LED's will alternate as a confirmation.
If the encode button is pressed and held again the DAC-2 will go back
Mode 1”
. It is confirmed
by the 12 bit and 16 bit encode LED's staying lit for 2 seconds.
Sometimes one power supply can get confused with another. The DAC-2 uses a 9 VDC
1200mA, AC adaptor. Using the wrong power supply can cause the DAC-2 to become
unstable or not power on.
Summary of Contents for DAC-2
Page 4: ......
Page 5: ...Using the Record Tool with the DAC 2 in Xpress DV 3...