2
1. POWER ON/OFF SWITCH
Turns main power on or off
2. POWER INPUT JACK
Connects to the supplied 12VDC 10 watt power supply
3. COMPONENT Y.U.V. VIDEO INPUT JACKS
Input for Y.U.V. component video from Betacam, DVCPro, DVCam, some DVD players, etc.
4. AUDIO/VIDEO INPUT JACK
Analog Audio/Video input convert to DV output.
Note: You can hook up all the cables onto all video/audio input connectors at same time without
conflicting to each connection
5. AUDIO/VIDEO OUTPUT JACKS
Analog Audio/Video signal output which is converted from DV input.
Note: You can hook up all the cables onto all video/audio output connectors at same time without
conflicting to each connection
6. DV IN/OUT JACKS (Two)
6 pin DV (FireWire, iLink, IEEE 1394) cable, from the DV port of a camcorder, DV Bank,
DV deck, etc.
7. DIP SWITCH MODE SETTING
Please refer to next page the DIP Switch setting.
8. BLACK BURST SIGNAL OUTPUT
Video Black Burst Signal to be used as a sync reference source
9. COMPONENT Y.U.V. OUTPUT JACKS
PLA Mode: Comply to SMPTE spec
NTSC Mode: Comply to Sony Betacam spec
