Datavideo CCU-100, Instruction Manual

Page: 8 / 18

- 7 -
3.2 Rear Panel
For more information on any of the products marked with an asterix (*) please visit our website www.datavideo.com
HD/SD-SDI Camera Video OUT
The CCU-100 provides four HD/SD-SDI camera video output channels.
These outputs are generally connected to the switcher inputs.
Look Back CV IN
This receives the composite video Look Back PGM signal from the
Switcher and allows signal transmission back to the camera
operators.
4 View Finder CV OUT / View Finder QUAD CV OUT
The four CV output connectors transmit composite video View Finder
signals to the multiple individual monitors.
The View Finder Quad CV Out allows the user to view all four screens
mentioned above as smaller images on just one composite video
monitor.
Ethernet Ports
These Ethernet ports are connected to the MCU-200 (S/P/J)* for
remote control of cameras connected to CCU-100.
Intercom IN
These 5-PIN XLR connectors are connected to the ITC-100* Intercom
System for receiving communication signals from the camera
operators.
DC IN Socket
The DC IN socket receives power from the PD-2 Power Center. The
power connection can be secured by screwing the outer fastening
ring of the DC IN plug to the socket.
Grounding Terminal
When connecting this unit to any other component, make sure that it
is properly grounded by connecting this terminal to an appropriate
point. When connecting, use the socket and be sure to use wire with
a cross-sectional area of at least 1.0 mm
2
.