background image

Operation Manual, JuniBox JB7210 

Version 1.1F 

The Quality of the Master Disc Counts 

As with blank discs, the quality and the data format of the master disc 
play a critical role in the duplication process. If you encounter 
difficulties try Safe-Speed Duplication to increase quality and lower 
failure rate. 

Writing Speed 

The recorder will automatically adjust the writing speed according to 
the disc quality.    The system will monitor and automatically adjust the 
writing speed as the optical laser moves from the inner ring to the outer 
ring, up to the selected speed.    The recorder’s maximum speed may 
never be reached if a lower grade disc is used. 

At the maximum speed, for a single recorder, duplicating a 4.7 GB 
DVD should not take more than 8 minutes.    Please check both the 
quality of the blank and the master disc if the duplication process takes 
more than 8 minutes for a single disc.    Use a reliable master disc for 
testing purposes.    You should also try different specification and 
brands of blank discs. 

You should also check the power supply’s voltage and amperes.   
Insufficient power supply may decrease output rate or increase failure 
rate. 

As a general rule, a lower writing speed will improve quality.    When 
creating audio and video discs a lower writing speed is recommended 
to assure quality. 

24 

© 2008, Datatronics Technology, Inc. 

Summary of Contents for JB7210 Series



























Reviews: