your modem is active, it may perform at an exceeding speed and an
ordinary serial port card may sometimes cause data loss.
You will also require an RS-232 cable to connect your modem with
computer. You will be Asked to buy a modem cable if you are a PC
user. The modem cable shall, at one end, have a DB25M (male)
connector that fits the female connector on the modem, and at the other
end a serial port connector that matches your computer.
Hardware Connection ______________________________________
1) Make sure that both the modem and computer are turned off.
2) Use an RS-232 cable to connect the modem to a serial port on your
computer. Secure the connector screw on it.
)
Verify the serial port number in which your modem is connected.
You must Write down the port number as you will need to specify
this number during software installation. As a general rule on PC
applications, the port COM1 is connected to a mouse, while COM2
is for a modem.
3) Use an RJ-11 cable to connect the LINE jack to the wall outlet of the
telephone line.
4) Connect a telephone set to the PHONE jack. You may leave this
jack disconnected if desired.
5) Make sure that the power adaptor that comes with your modem is of
a correct voltage that complies with your power source. Use the
adaptor to connect the power source to the 12VAC jack on the
modem.
Page:3
