DATATRAC 400H, Setup Instructions, Page: 4 / 4

DATATRAC 400H Setup Instructions To Clear GPS NVM
Bus setup
1. Press “ ENTER ” Key
a. SELECT LABEL PAGE #2 page displays
2. On the “SELECT LABEL PAGE #2” page
a. Select “ XMT ” key
b. Enter values as displayed in the following table:
LBL SDI 32 HEX DATA -1 SSM Par Msec
377 00 00 00 2C FF 00 1 0040
047 00 80 04 80 E4 00 1 0040
Note: Page does not contain a title
Use “>” To step through options
Use “^””v” to move to next/previous line
Use Keypad to enter alphanumeric entries
End of Procedure
1. Please refer to Service Information Letter 523-0826445 for complete NVM reset procedure.