XM-DVR Pro
Dual Channel DVR Page 25 of 32
December 2009 Manual Rev 3.05
Storage
Storage menu shows the amount of available recording time, allows for cyclical
recording configuration, and allows the user to erase storage media.
•
Auto Erase Events
– sets recording method
o
Yes – Enables cyclic recording of video files. When media is
full the oldest recordings are replaced by new ones.
o
No – When media is full file recording is suspended.
•
Erase Disk
– formats media (deletes all video files)
o
MS – erases master and slave (CF-1, CF-2)
o
ML – erases master only (CF-1)
o
SL – erases slave only (CF-2)
o
Quick – quick erase (recommended)
o
SEC – erases all data (supported media only)
•
Total Recording Time
– maximum recording time, based on audio/video
quality and media size.
Password
Allows for the setup of operator and administrator passwords, each being (4)
characters long. Two authorization levels can be set.
•
High – All functions
•
Normal – All functions except
o
Restore factory defaults
o
Erase disk
o
Change password
NOTE
Settings are saved by scrolling to
Save
and pressing the right arrow.
XM-DVR Pro
Dual Channel DVR Page 26 of 32
December 2009 Manual Rev 3.05
OSD (On-Screen Display)
On-screen display appearance settings.
•
Transparency
– sets transparency level.
•
Auto Hide
– hides lower and upper status bars.
•
Title Enable
– enables display of zone name on status bar.
•
Language
– select OSD language (at the present time, only English is
available)
System
Functionality and methodology of the DVR
•
Dual Media
– assigns channel recordings and media
o
Combined – both channels record to CF-1 until full then record
to CF-2 if it exists
o
Separate – channel 1 records to CF-1, channel 2 records to
CF-2.
o
Backup – reserved for OEM applications.
•
System Record Mode
– configures recording methodology
o
Security – enables trigger recording, disables remote control
recording.
o
VCR – enables remote control recording, disables trigger
recording.
•
Recording
– sets recording device
o
HDD – default for CF, HDD, or SSD
o
DVD – reserved for OEM applications
o
Query – reserved for OEM applications
•
Record Mode
– record mode for pre-alarm recordings only
o
Full frame – pre-alarm recordings are recorded at the full frame
rate.
o
Time lapse – pre-alarm recordings are recorded at a reduced
frame rate.
Factory Defaults
This option restores factory defaults, use right arrow to execute.
