DATATEC FLIR Ex Series, Instruction Manual

Page: 34 / 41

Wireless connectivity 12
12.1 Wi-Fi
You can connect the camera to a Wi-Fi network.
The Wi-Fi functionality is managed on the Settings menu. You can also enable/disable
Wi-Fi on the Quick menu.
12.1.1 Connect the camera to Wi-Fi
You can connect the camera to a Wi-Fi network as part of the initial setup of the camera.
You can also connect the camera at any time via the
Settings menu.
To connect to Wi-Fi via the Settings menu, do the following:
1. On the Settings menu, select Connections > Wi-Fi .
2. Select Wi-Fi = On .
3. Select one of the available networks.
Note
• Password-protected networks are indicated with a padlock icon, and for these you will
need to enter a password the first time you connect to the network. After that the cam-
era will connect automatically to the network. To disable the automatic connection, se-
lect the network in the list and then select
Forget network .
• Some networks do not broadcast their existence. They appear in the list as Untitled .
To connect to such a network, you will be prompted to enter additional parameters.
• To enable/disable the camera firewall, select Settings > Connections > Advanced >
Global firewall . It is recommended to keep the camera firewall enabled. Only disable
the firewall when experiencing problems connecting to legacy applications.
12.2 Bluetooth
If supported by your mobile phone, you can share the phone’s internet connection with
the camera via Bluetooth.
The Bluetooth functionality is managed on the Settings menu. You can also enable/dis-
able Bluetooth on the Quick menu.
12.2.1 Pair Bluetooth devices
1. On the Settings menu, select Connections > Bluetooth .
2. Select Bluetooth = On .
Note You also need to ensure that the external Bluetooth device is in visible mode.
On the mobile phone, you must make sure that Bluetooth is enabled, that the phone
is in discovery mode, and that Bluetooth tethering is enabled.
3. Select Available devices .
4. Wait until a list of available Bluetooth devices is displayed.
5. Select a device to begin the pairing procedure.
#T810624; r. AB/92323/92323; en-US 29