10
3. Locate the auto-limiting segmented screws included inside the package.
Insert the first screw and fasten the handle onto the hard drive. Tighten the
first screw securely to ensure that proper alignment is maintained. Repeat
the same for the remaining 3 screws.
4. After the auto-limiting segmented screws are tightened, test slides the
handle to make sure that the handle glide smoothly.
The SmartGuider Package includes one hard drive handle and four
auto-limiting segmented screws. The auto-limiting segmented screws are
designed to prevent the hard drive and/or the handle from damages due to
over-tightening. Furthermore, the SmartGuider design makes the handle
slide easily without any tightness.
