dataTaker DT800 Getting Started Manual Download

Page: 40 / 74

Getting Started with DT800

dataTaker

UM-0071-A0

Can’t See Live Data?

If the channel data in the Value column isn’t updating
as you think it should, check that

•

Edit Mode

on the Form menu is un-ticked (that is, the

form window is in Run Mode)

•

Pause

on the Form menu is un-ticked

• for real-time channels: DeLogger is connected to the

DT800, and the DT800 is running the program that
contains the channels you’ve specified to be
displayed in the form window

• for replay channels: the replay control panel is open and

showing the correct replay file’s name in its title bar.

The Form Menu

When a form window is DeLogger’s front-most
window, the seventh menu on DeLogger’s menu bar is

Form

(see Figure 20 on page 27). Commands on this

menu are specific to the form window, and some are
duplicated by buttons on the form toolbar (Figure 38).

Send the

schedule command (“polled” or “scan on host request” schedule).

Pause

the return of data.

Reset

all values in the Low Value column to zero (updated at the next scan).

Reset

all values in the High Value column to zero (updated at the next scan).

Scale view

down

(zoom out)

Scale view

(zoom in)

Turn

Edit Mode

on/off.

IGURE

A DeLogger form window in Run Mode (

Form

menu >

Edit Mode

is un-ticked)

Edit Mode on

Edit Mode is ticked on the Form menu.

Edit Mode off

(Run Mode)

Edit Mode is un-ticked on the Form menu.

Edit Mode

button depressed

Edit Mode

button raised

Buttons available in Edit Mode

Buttons available in Run Mode

IGURE

Buttons available on the form toolbar in Edit Mode and Run Mode

Summary of Contents for DT800











































































Search results

Summary of Contents for DT800

Reviews:

Related manuals for DT800

Brands by name

Popular brands

dataTaker DT800, Getting Started Manual

Search results

Summary of Contents for DT800

Reviews:

Related manuals for DT800

Brands by name

Popular brands