Viper User
Manual (001-5008-000 Rev6)
Page
57
connection will remain open. If the keepalive message is not received successfully the Viper
will close the existing TCP connection.
To disable this feature, set the TCP Keepalive to "0". With the TCP Keepalive feature
disabled, the Viper will leave the TCP connection open indefinitely. An existing TCP
connection will only close if the remote endpoint closes the connection, the Viper's serial
port is disabled, or if the Viper is unable to successfully communicate with the remote
endpoint during a data transmission.
1.1.36
RTS/CTS Mode Settings
CTS Assertion Delay
The time in milliseconds the data will be delayed after the CTS has been sent.
CTS Negation Delay
The time in milliseconds the CTS will be kept asserted after the last character has been
transmitted.
Send all buffered data before negating CTS
All the data will be sent before the Viper drops the CTS control line.
Fragment large messages
Allows the user's data to be fragmented into smaller messages.
Discard all buffered data when entering flow control
The data in the serial port buffer will be discarded and only new data will be processed
under the flow control.
