120 20195-100 Preliminary
Paragon4 – UHF, 700, & 800MHz User Manual
18
Keep the RF IP setting as is, providing customer is not using the 10.0.0.0 IP network.
Enable RIPv2 on Base station.
4.5 Login Screen
On the Address line of the Internet browser of your choice, type the factory-default IP addresses given to
all Paragon4 radiomodem units: 192.168.20
x
.1
(where x is 2 for the ETH1 Data port and 3 for the ETH2
Setup port)
. Press Enter. The Enter Network Password screen opens.
Figure 14 - Enter Network Password screen – ETH1 Data port shown
4.5.1 Initial Installation Login
For an initial installation, enter a User Name of 1 to 15 characters and the default Password
ADMINISTRATOR
(upper case letters)
. Click OK. The Web interface “Welcome” screen opens Figure
15.
For subsequent access to the Paragon4 unit, use the User Name and Password that you will have config-
ured.
Notes:
User Name field can be left blank. It only serves to identify the person gaining access.
Password is common and affects all User Name entries.
Figure 15 - Web User Interface – Welcome Screen
192.168.202.1
