120 20195-100 Preliminary
Paragon4 – UHF, 700, & 800MHz User Manual
17
4.4 IP Network Settings
4.4.1 IP Network Settings (with Host)
Figure 12 below illustrates Paragon4 base station settings. In Setup (Advanced)
Î
LAN (IP), set the data
Interface 1 port (Eth1) IP addresses (set the setup Interface 2 port (Eth2)) and IP netmask of both Base
and Mobile(s).
Keep the RF IP setting as is, providing customer is not using the 10.0.0.0 IP network.
Add routes in the Host (route add…)
In the illustration, Host and PC are part of different IP subnet
Figure 12 - IP Network Settings in Router Mode (with Host)
4.4.2 IP Network Settings (with Router)
Figure 13 below illustrates Paragon4 base station settings. In Setup (Advanced)
Î
LAN (IP), set the data
Interface 1 port (Eth1) IP addresses (set the setup Interface 2 port (Eth2)) and IP netmask of both Base
and Mobile(s).
In the illustration, Host and PC are part of different IP subnet.
Figure 13 - IP Network Settings in Router Mode (with Router)
Paragon3 Base
SETUP:
Eth2 IP: 192.168.203.1
MASK: 255.255.255.0
RF IP: 10.0.0.1
MASK: 255.0.0.0
Mobile
DHCP Server
RF IP: 10.0.0.2
MASK: 255.0.0.0
Eth1 IP: 192.168.201.1
MASK: 255.255.255.0
RF Network
Host
IP: 192.168.202.2
MASK: 255.255.255.0
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
PC
DHCP Client
DATA:
Eth1 IP: 192.168.202.1
MASK: 255.255.255.0
Paragon3 Base
SETUP:
Eth1 IP: 192.168.203.1
MASK: 255.255.255.0
RF IP: 10.0.0.1
MASK: 255.0.0.0
Mobile
DHCP Server
NAT
RF IP: 10.0.0.2
MASK: 255.0.0.0
Eth1 IP: 192.168.201.1
MASK: 255.255.255.0
RF Network
Router
IP: 192.168.202.2
MASK: 255.255.255.0
route add 10.0.0.0 mask 255.0.0.0 192.168.202.1
PC
DHCP Client
DATA:
Eth1 IP: 192.168.202.1
MASK: 255.255.255.0
Default Gateway:
192.168.202.2
Host