120 20110-100
Gemini/PD Installation Guide
12
Figure 5 - RIS window
4.3 Window
This program uses one main display screen only.
Referring to Figure 5, starting from top and
moving down to the bottom, it has:
•
A
Button bar
, containing the program’s
five main commands: Exit, Get, Get As,
Put From and Station Reset plus a Product
type field.
•
A
Data section
, containing the Banner plus
the Comments and Password fields and their
related Put buttons.
•
A
Channel(s) section
, to select and activate
a channel.
•
A
Test section
, containing the TXON and
Ping buttons and the relevant address fields.
•
An “i” square button, that opens up the
“About”
window.
•
A
Status bar,
for displaying standard user-
messages. Other messages appear in dialog
window boxes or in warning windows.
4.4 Functions
The RIS program is used to:
•
Save an existing configuration from a unit to
a file.
•
Take a configuration from a file and upload
it to a unit
•
Check Gemini
PD
•
Test and/or trouble-shoot installations
4.4.1 Configuration to a file
Saving the unit’s configuration to a file allows
the user to:
•
Subsequently restore the configuration.
•
Safeguard a copy as documentation of the
configuration.
Note: The configuration and status files are
ASCII files and may be e-mailed or faxed to
technical support when requested to do so.
Warning:
Do not make any changes to these files. Any
changes made to the configurations MUST be
done at factory or by Dataradio system
engineering.
Dataradio Radio Installation Program
Exit
Get
Get As
Put From
Station Reset
Gemini
Banner:
Comments:
Password:
Put Comments
Put Password
Channels
CHAN 1
CHAN 5
CHAN 9
CHAN 13
CHAN 2
CHAN 6
CHAN 10
CHAN 14
CHAN 3
CHAN 7
CHAN 11
CHAN 15
CHAN 4
CHAN 8
CHAN 12
CHAN 16
Show All Channel Frequencies
dBm
I
II
TXON (Modulated)
TXON (Unmodulated)
Ping Address:
1
Ping
i
-133
-125
