DI–720/DI–722/DI–730 Series User Manual
Accessories
55
2.
Unscrew the six screws on the top of the instrument and remove the top hatch cover to reveal the DI-8B back-
plane.
3.
Plug the DI-8B module firmly into one of the channel positions clearly labelled on the backplane and secure with
the set screw.
Note: Be sure to completely screw the module into place or vibrations could short the system.
DI-
8B modules are installed on (or removed from) the socketed DI-8B backplane (located on the circuit board) and
are secured with a non-removable mounting screw. Each channel position is labeled “CHANNEL 1,” “CHAN-
NEL 2,” etc. on the socketed backplane. The DI-8B modules can be mixed or matched in any combination suit-
able for the application and are identical in pinout and size, so it doesn't matter which module gets plugged into
which channel position
.
4.
Using an erasable pencil write the module number of each DI-8B module installed on the sticker located on the
top hatch to indicate which module is installed at each channel position.
5.
After all modules are installed and indicated on the sticker reassemble the instrument.
Note:
If your are installing
a thermocouple module you must enable the Cold Junction Compensation jumper for that channel (see
“Enabling CJC for Thermocouple Modules” below).
DI-8B Module
Front
Rear
Top Hatch
DI-8B Backplane and Circuit Board
Set Screw
101058-B
Write Installed Modules
in the spaces provided
with an erasable pencil.
Summary of Contents for DI-720-EN
