Dataprobe IP-28 Series Manual Download Page 12

 
 

iP-28xx 

 

Page 12 

TECHNICAL SUPPORT, RETURNS and WARRANTY 

 

Dataprobe Technical Support is available 8:30AM to 5:30PM ET to assist you in the installation and operation of this product.  
To obtain Technical Support call our Tech Support Hotline at 201-967- 8788, or Email us at [email protected].  Please 
have the following information available when you call: 
 

 

Model of Product 

 

 

 

Serial Number 

 

Date of Purchase 

 

 

 

Name of Seller (if other than Dataprobe) 

 
If you purchased this product through an 

Authorized Dataprobe Reseller,

 you should contact them first, as they may have 

information about the application that can more quickly answer your questions. 
 

WARRANTY 

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material 
and workmanship for a period of One Year from the date of initial purchase.  If the product should prove defective within that 
period, Seller will repair or replace the product, at its sole discretion. 
Service under this Warranty is obtained by shipping the product (with all charges prepaid) to the address below. Seller will 
pay return shipping charges.  Call Dataprobe Technical Service at (201) 967-8788 to receive a Return Materials Authorization 
(RMA) Number prior to sending any equipment back for repair.  Include all cables, power supplies and proof of purchase with 
shipment. 

 

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, 
ABUSE OR NEGLECT.  SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY 
SET FORTH HEREIN.  EXCEPT TO THE EXTENT PROHIBITED BY LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL 
WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR ANY PURPOSE ARE LIMITED TO THE WARRANTY PERIOD 
SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL 
DAMAGES. 

 

Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or 
limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.  This warranty 
gives you specific legal rights, and you may have other rights which vary from jurisdictions to jurisdiction. 

WARNING:

 The individual user should take care to determine prior to use whether this device is suitable, adequate or safe 

for the use intended.  Since individual applications are subject to great variation, the manufacturer makes no representation 
or warranty as to the suitability of fitness for any specific application. 

 

 

 

Dataprobe Inc. 

 

 

11 Park Place 

 

 

 

Paramus, NJ  07652

 

 

Summary of Contents for IP-28 Series













Reviews: