Changing the IP Address
1. Device Management Utility
Obtain the Device
Management Utility (DMU) from Dataprobe’s website at
dataprobe.com/support-iboot-g2s
.
a. Open the DMU on a PC on the same physical network as
the iBoot and select
Device > Discover
to display the
current IP Address of the iBoot.
b. Select
Set > Network Settings
to change the network
settings. The IP settings can only be set within the first
two minutes of powering up the iBoot. The DMU will only
work with iBoots on the same physical subnets as the PC
Complete instructions for the DMU are provided with the
download, and in the full iBoot-G2S Manual.
2. Web Page Setup
From the home page, click on Setup,
then Network. Enter the new IP Address, Subnet Mask,
Gateway and DNS, then click Save. Click the Reboot button
(or press the reset button next to the power outlet LED) to
restart the iBoot-G2+ with the new settings. To lock the
settings, select IP Mode = Static. If IP Mode remains or is
programmed to DHCP, the iBoot will obtain an address from a
DHCP Server as soon as it finds one.
Important Safety Instructions
When using this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
1.
Read and understand all instructions.
2.
Follow all warnings and marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4.
Do not use this product in an outdoor environment or near water, for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
5.
Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6.
Slots and openings in this product and the back or bottom are provided for ventilation
to protect it from overheating; these openings must not be blocked or covered. The
openings should never be blocked by placing the product on the bed, sofa, rug, or
other similar surface. This product should never be placed near or over a radiator or
heat register. This product should not be placed in a built-in installation unless proper
ventilation is provided.
7.
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult
your dealer or local power company.
8.
This product is equipped with a three wire grounding type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding type plug. Do not use a 3-to-2 prong adapter at the receptacle; use of this
type adapter may result in risk of electrical shock and/or damage to this product.
9.
Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
10. Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
11. Never push objects of any kind into this product through slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electrical
shock. Never spill liquid of any kind on the product.
12. To reduce the risk of electrical shock, do not disassemble this product, but take it to a
qualified serviceman when some service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks. Incorrect re-
assembly can cause electric shock when the appliance is subsequently used.
13. Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power supply cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions because
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal
operation.
e) If the product has been dropped or has been damaged.
f)
If the product exhibits a distinct change in performance.
14. Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
15. Do not use the telephone to report a gas leak in the vicinity of the leak.
16. Do not exceed the maximum output rating of the auxiliary power receptacle.
Fig. 5 Device Management Utility
Fig. 6 Network Setup Page
To get all the benefits of your iBoot, register it
:
dataprobe.com/product-registration-form/
•
Notification of Updates
•
Exclusive Offers
•
Expedited Warranty Service
•
Advanced End-of-Life Notification
Summary of Contents for iBoot-G2S
Page 4: ......
