Datapath X4 User Manual Download Page 16 | Manualshive

Page: 16 / 28

Datapath X4 User Manual Download Page 16

16 18/10/2010

x4 Control Application

Application Installation

Note: Do not plug the x4 into a USB port until the driver installation is complete.

Locate the Install folder on the Datapath CD supplied with the x4, run

install.exe.

and

follow the installation wizard. During installation a warning message is displayed stating that
the driver does not have Windows® Logo accreditation.

Select

Continue Anyway

to complete the installation.

The Datapath x4 can now be connected to a suitable USB 1.0 or 2.0 port using the cable
supplied. At this point the hardware will be detected by Windows® as an x4 splitter, and a

New Hardware

wizard is displayed. Allow the wizard to search, and click on the

recommended option to to enable the previously installed driver to be associated with the new
hardware.

Press

Continue Anyway

to accept the driver.

Running the x4 Control Application

To open the x4 Control application select

Start/All Programs/x4 Control

.

The

application will search for an x4 connected to your computer and display the status of the

first x4 detected. Should there be more than one x4 in use, a list of all available x4’s can be
found in the File menu.

Once the application has detected an x4 the main status screen is displayed

Fig.4.

Fig.4

«
...
14
15
16
17
18
...
»

Summary of Contents for X4





























Reviews:

No comments