Datapath VisionSDI2 User Manual Download Page 3

Chapter 1

Safety Instructions

To prevent damage to your Datapath product or injury to personnel operating the equipment, please 
read the following safety precautions prior to operation.  These instructions should be made available to 
all those who will use and operate Datapath products.

Power Supply

All Datapath products require a mains power supply.  This power supply must be disconnected when 
equipment is being upgraded or relocated.

Cables

Do not expose cables to any liquids; doing so may cause a short circuit which could damage the  
equipment.  Do not place heavy objects on top of any cables as this can cause damage and possibly lead 
to exposed live wires.

Ventilation

All computer equipment should be located in a well ventilated area.  All ventilation holes on the comput-
er casing must be kept clear of any obstruction at all times.  Failure to do so will result in the system over 
heating and damaging your equipment.

Working Environment

The equipment should be located in an environment free from dust, moisture and extreme changes 
in temperature and should be placed on a stable and solid work surface.  Liquids (hot/cold drinks etc) 
should not be placed near the equipment as spillage could cause serious damage.

Gas/Flammable Liquids

Electronic equipment should never be used in the presence of gas or any flammable liquid, doing so 
could result in an explosion or serious fire.

Smoke/Unusual Smells

Should you notice smoke or unusual smells being emitted from your computer, turn off and unplug the 
system from the mains supply.  The system should then be passed to a qualified technician for 

 

inspection.  Continued operation could result in personal injury and damage to property. 

Maintenance

Maintenance should only be carried out by competent technicians, any Datapath plug-in cards that are 
physically damaged should be returned to Datapath for repair using Datapath RMA procedures.

Disposal

At the end of life all Datapath products should be disposed of as per local laws and regulations dictate.  
In UK contact Datapath to arrange disposal.  Our WEE registration number is WEEE/AA0005ZR.

1

Summary of Contents for VisionSDI2
















Reviews: