Your packing box should contain the following items:
The VisionSC-UHD2 - Dual HDMI 2.0 capture card.
(For latest Vision Drivers and software go to
www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
This device complies with part 15 of the FCC Rules.
PACKING LIST
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
www.datapath.co.uk
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
You are likely to need a flat blade and/or a cross head
screwdriver for the installation of the VisionSC-UHD2 card;
it would be useful to have these to hand before you begin.
1. Power down the host system and also the input sources
which will be captured on the VisionSC-UHD2 card
2. Remove the host system cover.
3. Locate a vacant PCie slot (x8 or x16) on the
motherboard and remove the corresponding backing
plate.
4. Position the VisionSC-UHD2 into the selected PCIe
slot and secure the card by screwing the bracket to the
chassis.
5. Connect a HDMI 2.0 rated cables to the input
connectors on the VisionSC-UHD2.*
6. Connect the HDMI cables to input sources.
7. Power up the host system and then the input sources.
* Note: It is recommended that only authentic cables,
approved and certified by HDMI are used with the
VisionSC-UHD2 card. When capturing 4k 60p, Premium
Certified cables should be used.
Certified cables have a hologram/QR coded label
attached.
Download the required driver
install.exe
from the
Support pages on the Datapath website and follow the
Installation Wizard instructions as prompted.
FL
Y-
VSC-EN2-
V1.0
