background image

Software Overview

All Vision capture cards are supplied with a powerful software application for configuring the format of the 

input  sources and displaying the data.  

Video Streaming

DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and 

stream video over networks or the Internet:

• 

Microsoft Media Encoder®

• 

VLC

• 

VirtualDub

• 

Any other DirectShow encoding software

For streaming applications, Vision cards can be used with Windows Media Encoder to compress and 

stream captured video. To replay the video, use Windows® Media Player.

Any application compatible with Windows® DirectShow technology can use Vision capture cards due to 

their built-in WDM support.

Vision Software Capabilities

Timestamp support for streaming synchronisation:

• 

Synchronisation of multiple inputs across multiple cards 

• 

Synchronise systems using network clock  synchronisation

• 

For edge blending and other applications

 Flexible and configurable EDID Management:

• 

 Allows programming of custom EDID parameters for capture cards

Low Input to Output Capture Latency

DMA to third party graphics vendors back and front buffers via Direct3D

• 

Compatibility with AMD DirectGMA

• 

Compatibility with Nvidia GPUDirect  

 User Mode filter for source selection

• 

 Enables cropping support in DirectShow on all inputs

• 

Supports Start and Stop trigger interface on all Visi0n inputs

Datapath Unified Vision Driver

• 

Multiple cards per system, 16 streams per card

• 

Frame sync and time stamping

5

Summary of Contents for VisionSC-SDI4

















Reviews: