Your packing box should contain the following items:
The VisionDVI-DL data capture card.
Installation CD-ROM.
(For latest drivers go to www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
You are likely to need a flat blade and /or a cross head
screwdriver for the installation of the VisionDVI-DL card; it
would be useful to have these to hand before you begin.
Power down the PC (including peripherals), switch off at the
mains and disconnect all the cables connected to the
computer, noting the positions for accurate reconnection.
Remove the PC cover.
Locate a vacant PCI Express slot (x4 or higher) on the
motherboard and remove the backing plate (retain all
screws)
If in doubt consult your motherboard documentation to
correctly identify a PCI Express slot. If the card is forced
into a 32 or 64 bit PCI or PCI-X slot it will be irreparably
damaged when the system is powered up and the warranty
will be void.
Remove the VisionDVI-DL card from its packaging and
secure it firmly into the empty PCI Express slot.
Reconnect all cables to the PC then connect a Dual-Link DVI
cable (not supplied) distributing the required video signals
to the connectors on the VisionDVI-DL card.
Insert the Datapath CD into your CD drive, the CD will
autorun and display the following dialogue. If the CD
drive fails to autorun browse the CD and locate and
double click the
setup.exe
file.
Click on
Install Drivers…
and follow the Installation
Wizard instructions as prompted.
PACKING LIST
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
( www.datapath.co.uk )
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
