Datapath Arqa RX1/C, User Manual, Page: 23 / 40

Show the Last Received Image = S
Users can select what is displayed on the monitor
connected to the Arqa RX1 unit when it is disconnected
from and Arqa TX1.
If the Show Last Image feature is disabled, a black screen is
displayed. If enabled, the last image received before the unit
was disconnected is shown.
From the KVM Settings menu
>
Arqa RX1 menu
press
S
to
Enable
or
Disable
.
Using the Power Save Mode = P
Power save mode can be enabled or disabled on the Arqa RX1 unit. If enabled,
the unit will go into power save mode should the Arqa RX1 not receive data from
the Arqa TX1 for a period exceeding 1 minute.
If the Arqa RX1 is configured to Show Last Image , when the system becomes
disconnected, the image is displayed for a period of one minute and will then
enter power save mode.
To wake the system up from power saving mode, press any key.
Selecting a Keyboard Layout = K
The Keyboard Locale menu enables the user to select one of three keyboard
layouts for use when navigating the On Screen Display menu. The choices are
French (Azerty), English (Qwerty) and German (Qwertz).
To select the required keyboard layout press
K
in the
KVM Settings
>
RX1 menu
and the
Keyboard Locale
menu is displayed.
Press E to select English (Qwerty)
Press
D
to select German (Qwertz)
Press F to select French (Azerty)
Changing the Keyboard Fallback Mode – O
USB Keyboards have to be identified by the Arqa RX1 to enable the user to use
the On Screen Display menu. For most keyboards use setting 0 . There can be
instances when some USB mouse devices behave like a keyboard, in this instance
select fallback mode
1 or 2 .
23
Arqa User Guide