1
Contents of the Cutter Kit
This kit contains the following item:
Cutter
Assembly
Follow the steps listed below to install this option.
Tools
Required
To install this option you will need a #2 Philips screwdriver.
Step 1: Preparing the Printer
CAUTION
For your safety and to avoid damaging the equipment, turn ‘Off’ and unplug the printer before
installing the Cutter.
Turn ‘Off’ the power switch and unplug the
printer.
Open the cover. Remove any installed media
from the printer.
Remove the Fascia by gently pulling it
forward.
Loosen and remove the Thumbscrew, then
remove the Tear Plate (or if equipped, the
Present Sensor option).
Fascia
Tear Plate
Thumbscrew
