Database / Menu
Database and Menu Selection will be constructed to support the following system level data.
The following resides on the operator’s front panel menu under “PRINTER OPTIONS”
→
“RFID”.
Upon selection the display will show “NOT INSTALLED” if the device is not equipped or not
communicating and then proceed to the Mode selection.
RFID
MODE
DISABLE, UHF (915mhz), HF(13.56mhz)
POSITION
0.00 - 4.00.
Currently if value is 0.00 print
position is used to encode tag. If > 0.00
presented position is used.(Subject to
change.)
HF SETTINGS
AFI VALUE
2 Char Hex Value (Industry Codes)
AFI LOCK
ENABLE or DISABLE
DFSID VALUE
2 Char Hex Value (Industry Codes)
DFSID LOCK
ENABLE or DISABLE
EAS VALUE
2 Char Hex Value (Mfg. Codes)
UHF SETTINGS
LOCK
CODE
2 Char Hex Value
LOCK AFTER WRITE
ENABLE or DISABLE
ERASE ON FAULT
ENABLE or DISABLE
RETRY
ATTEMPTS
0 -> 9
AUTO DETECT TAG
Moves label to find tag.
AFI - Application Family Identifier
DFSID - Data Storage Format Identifier
EAS - Electronic Article Surveillance
The following resides on the operator’s front panel menu under “COMMUNICATIONS”
→
“HOST
SETTINGS”
→
“OPTION FEEDBACK”.
OPTION
FEEDBACK
DISABLE, RFID, ASCII, HEX, SCANNER
