Datamax E-class E-3202, Operator'S Manual

Page: 20 / 62

12 E-3202/Cash Drawer Printer
4.1.4 Other Modes
There are only three possible error conditions, they are as follows:
Error Cause Action
Paper Out The printer is out of media stock or
the stock has been loaded incorrectly. Replace or correctly load
Stock.
Head Up The printer ‘Lid’ is not down and
latched. Be sure the ‘Lid’ is
down and latched.
Printhead
Overheated The printhead has exceeded normal
operating temperature. Allow 5-10 minutes for
the printhead to cool.
Once the error condition has been satisfied the printer will automatically
exit the ERROR mode and return to the OFFLINE mode. To return to
the ONLINE mode and continue printing, press the Left Button once.
This mode will allow the user to verify the data received by the printer.
While in dump mode, the printer will print the received data in
hexadecimal.
To enter DUMP mode:
With the printer off, (both LED’s off), press and hold the Left Button
until the word “DUMP” is printed.
To exit DUMP mode:
Turn the printer off, (press and hold Left Button) or disconnect power.