4
Step 4: Configuring the Printer
While the Cutter option is a plug and play device, this step may be necessary if the printer’s default
configuration has been changed. Follow the steps below to configure the printer:
Note: In the following procedure, consult the Operator’s Manual for detailed front panel instructions.
A)
Press the
MENU Button
on the printer’s front panel.
B)
Using the
DOWN Button
, scroll to
PRINTER OPTIONS
then press the
RIGHT Button.
C)
Using the
DOWN Button
, scroll to
CUTTER
then press the
ENTER Key
.
D)
Using the
DOWN Button
,
scroll to
AUTO
then press the
ENTER Key
.
E)
Press
the
EXIT Key
then, at the
SAVE CHANGES?
prompt, select
YES
.
F)
Turn
the
Power Switch
‘Off’ and ‘On’ to reset the printer and complete the configuration.