Dataman 448PRO2, User Manual, Page: 113 / 168

PG4UW
113
name of selected device in control program. Multiple devices are possible to program and test
via JTAG chain: JTAG chain (ISP-VME).
More information on the website: http://www.latticesemi.com
Software tools:
Lattice:
ispLEVER, IspVM System ISP Programming Software, PAC-Designer Software,
svf2vme utility (converts a serial vector file to a VME file)
Device / Device info
The command provides additional information about the current device - size of device,
organization, programming algorithm and a list of programmers (including auxiliary modules),
that supported this device. You can find here package information and other general
information about current device too.
The reserved key <Ctrl+F1> will bring out this menu from any menu and any time immediately.
Programmer
Menu Programmer includes commands used for work with programmers.
Programmer / Find programmer
This item selects a new type of programmer and communication parameters. This command
contains following items:
Programmer - sets a new type of programmer for find. If a Search all is selected, the control
program finds all supported programmers.
Establish communication - allows manual or automatic establishing communication for a
new programmer.
Speed - sets speed, if a manual establishing communication is selected, which PC sends data
into the programmer. Speed is expressed as a percent from a maximal speed.