•
WLAN
Enable/disable Wi-Fi (WLAN) function
WWAN/GPS
Enable/disable WWAN/GPS function
Bluetooth
Enable/disable Bluetooth function
Auto-rotate
Enable/disable Auto-rotate screen function
Setup
Tab to set hotkey, light sensor, external GPS antenna, and external
WWAN antenna settings. For details, refer to "Configuring the
SETUP Menu Settings." See
User Manual.
Barcode
Triggers the Barcode Scanner function
(optional device).
<!>
Power
Green: System is running
Blinking Green: Sleep Mode
<r>)
RF
Status of RF (WLAN, WWAN, or Bluetooth)
communication. LED blue when function enabled.
Battery
Indicate the battery status:
• Green: battery fully charged (95% or above)
• Orange: battery charging
• Flashing Orange: charging error
• Red: battery is lower than 10%
• Off: discharged
UIC
Rugged Tablet
QuickMenu Overview
NOTE: If the icon is gray (i.e.
), this indicates the current function is disabled.
In Windows 7 tap the arrow on the Taskbar
(located to the left of the system tray) then
tap the Quick Menu Icon.
OFF
Quick Menu Icons
Optional Hardware
• DC ADAPTER
• Mag Stripe Reader with Contact
• Barcode Scanner
Smart Card Reader
• X-Strap (Handstrap)
• Contactless Smart Card Reader
• Office Dock
• Vehicle Dock
Installing the Battery
1. Align and insert the battery to the battery compartment.
2. Push completely until the battery locks into place.
3. Slide the battery latch to the lock position to secure the battery.
Status Light Indicators
The tablet has status lights located near the top of the tablet (to the
left of the front camera). See below for information on status lights.
2015.9.23
DATALUX TM110 Tablet
