DATAVS2-VSM INSTRUCTION MANUAL
24
8
NOTE
Restart the device to apply correctly the changes.
To return to main panel without saving, press
ESC
.
8.2 SENSOR SETTINGS
This panel, when a DataVS2 is connected, can display information such as
name
,
firmware,
Hardware revision, MAC
and modify the sensor network parameters:
IP
,
Netmask and
DHCP
...
To change the network parameters of DataVS2, the user has to simply move the focus on
the desired value and use the
UP/DOWN ARROWS
to increase or decrease the current
value.
To save the changes press
SET
.
NOTE
Restart DataVS2 to apply correctly the changes.
To return to main panel without saving, press
ESC
.
DataVS2
Info
unchangeable
Parameters
changeable